Four drive types, one interface standard: every machine is quoted with the flange pattern, cutter and adaptor that match your pipe.









Ten-second clips from the workshop and from site: tapping a live main, stopping a line, cutting and beveling. Click a card to play.


Most sourcing problems are interface problems — the machine does not match the valve, the cutter does not match the pipe. Because we make the whole stack, the interfaces are our problem, not yours.
Diameter, pressure, medium, and a photo of the site if you have one.
We propose the model and stack, with drawings, within one working day.
Machining, assembly, pressure test, and a test record with the goods.
Export crates, documents, and a shipping schedule you can plan around.
Exhibitions, new machines and technical notes from the shop floor.

We will run live hot tapping and line stop demonstrations on a DN200 test loop at stand Z2-C41, alongside the full cutting and repair range.
Read →
Two 18 V packs now cut a 200 mm hole in ductile iron in under nine minutes, with no cable and no hydraulic hose on the pipe.
Read →
Test pressure, material certificate, dimension sheet, piping drawing and packing photos are issued with each shipment, filed by serial number.
Read →
An additional 3,200 m² of machining and assembly space came online in March, mainly for large diameter saddles and line stop tees.
Read →
Wall thickness, ovality, lining, valve orientation, coupon retrieval — the list our engineers run through before every tap, now as a printable PDF.
Read →Send the diameter, working pressure and what flows inside. We reply with a specification and price within one working day.
Scan to add on WeChat
JC-Leon