Wuxi, China · Manufacturer & exporter since 2016info@jcpipeline.com+86 18130056225
Home Products
Product ranges
Hot Tapping Machines Projects News About Contact
Home/Products/Hot Tapping Machines/Manual Hot Tapping Machines/Manual High-Pressure Hot Tapping Machine JC-M50-H
Manual High-Pressure Hot Tapping Machine JC-M50-H
10 · JC-M50-H

Manual High-Pressure Hot Tapping Machine JC-M50-H

Manual High-Pressure Hot Tapping Machine JC-M50-H cuts branches from DN20 – DN50 (3/4" – 2") into live mains, with a design pressure of 20 / 100 bar and an ANSI #150, #600 flange pattern. The bar is turned and fed by hand at 0.05 mm/r, so the machine works where there is no power and no hydraulic unit on site. Boring bar travel is 300 mm with a 20 mm boring bar; the unit weighs 8 kg and measures 900 × 80 × 80 mm. The machine is rated for water, oil, gas and steam.

Key features

  • Design pressure 20 / 100 bar
  • Tapping range DN20 – DN50, 300 mm bar travel
  • 20 mm boring bar, ANSI #150, #600 flange
  • Manual drive, manual feed
  • Rated for water, oil, gas and steam

Lead time 25–35 working days after deposit. Test record, drawing and packing list go with every shipment. Payment: 30% T/T deposit, balance against copy of B/L.

Specifications

Hot tapping range3/4" – 2" (DN20 – DN50)
Boring bar travel12" / 300 mm
Boring bar diameter20 mm
Design pressure20 / 100 bar
Flange standardANSI #150, #600
Drive modeManual
Feed modeManual
Feed volume0.05 mm/r
Pipe mediumWater, oil, gas and steam
Pipe materialSteel, cast iron, plastic and concrete pipe
Dimensions900 × 80 × 80 mm
Weight8 kg

Typical applications

Service connections on distribution mainsMeter and fire-riser branchesBuilding water and heating lateralsDistrict water and fire mains
Product details

Overview

Manual High-Pressure Hot Tapping Machine JC-M50-H cuts branches from DN20 – DN50 (3/4" – 2") into live mains, with a design pressure of 20 / 100 bar and an ANSI #150, #600 flange pattern. The bar is turned and fed by hand at 0.05 mm/r, so the machine works where there is no power and no hydraulic unit on site. Boring bar travel is 300 mm with a 20 mm boring bar; the unit weighs 8 kg and measures 900 × 80 × 80 mm. The machine is rated for water, oil, gas and steam.

A hand-driven bar for small high-pressure branches: 100 bar rating in an 8 kg assembly that a single fitter can carry up a ladder.

Models are listed with the flange pattern they are built to: ANSI #150, #600.

Tapping sequence

  1. Weld or bolt the tapping flange to ANSI #150, #600, water, oil, gas and steam; pressure-test the branch connection.
  2. Bolt the tapping valve to the flange and the machine to the valve outlet.
  3. Fit the shell cutter and pilot bit for the pipe material, then open the valve fully.
  4. Feed the bar at 0.05 mm/r; equalize pressure before withdrawing the cutter.
  5. Retract the bar past the valve, close the valve, release pressure and lift the machine.

Standard scope of supply

  • Hot tapping machine JC-M50-H, assembled and run-tested
  • Boring bar, 300 mm travel
  • 20 mm boring bar, #150, #600 ANSI flange adaptor
  • Tool kit, seals and operating manual

Before you order

  • Pipe outside diameter, wall thickness and material (steel, cast iron, PE or concrete)
  • Working pressure and medium temperature
  • Flange standard and tapping size required — DN20 – DN50
  • Cutter type: shell cutter for steel, carbide or diamond for cast iron and concrete
Model range

All models, side by side

ModelRange (inch)Range (mm)Boring bar travelBar diameter (mm)Design pressure (bar)Flange standard (ANSI)Drive
JC-M50-H3/4" – 2"DN20 – DN5012" / 300 mm2020 / 100#150, #600Manual
JC-M100-H1-1/4" – 4"DN32 – DN10020" / 500 mm3020 / 100#150, #600Manual
JC-M150-H1-1/4" – 6"DN32 – DN15024" / 600 mm3020 / 100#150, #600Manual
JC-E150-H2-1/2" – 8"DN65 – DN20030" / 750 mm4020 / 50 / 100#150, #300, #600Electric
JC-E300-H6" – 16"DN150 – DN40050" / 1250 mm6020 / 50 / 100#150, #300, #600Electric
JC-E400-H12" – 28"DN300 – DN70074" / 1850 mm8020 / 50 / 100#150, #300, #600Electric
JC-H3006" – 16"DN150 – DN40050" / 1250 mm6020 / 50 / 100#150, #300, #600Hydraulic
JC-H40012" – 28"DN300 – DN70074" / 1850 mm8020 / 50 / 100#150, #300, #600Hydraulic
JC-H50020" – 48"DN500 – DN120074" / 1850 mm10020 / 50 / 100#150, #300, #600Hydraulic
JC-H80032" – 72"DN800 – DN180090" / 2250 mm16020 / 50 / 100#150, #300, #600Hydraulic
JC-H100032" – 120"DN800 – DN3000120" / 3000 mm20020 / 50 / 100#150, #300, #600Hydraulic
JC-H01021" – 2"DN25 – DN5012.8" / 320 mm20100#600Hydraulic
JC-H01041" – 4"DN25 – DN10022" / 550 mm25100#600Hydraulic

Swipe the table sideways to see every column.

Dimensions and weights are nominal. Pressure ratings are working pressure at ambient temperature; confirm the flange standard and pipe material before ordering.

Related products

Other products in this range

Tell us the pipe, pressure and medium

Send the diameter, working pressure and what flows inside. We reply with a specification and price within one working day.

Send an inquiry →
WeChat Scan to add on WeChat JC-Leon
+86 18130056225